(A) lap broken edge
The main reason for this is:
1. Quilts production line dust cage lining broken flowers.
2. quilts production line dust rods and cotton plate on both sides of the curved plate is not smooth, hanging flowers
3. cotton quilts production line lap small board hanging flowers.
(B) lap damage
The main reason for this is:
1. quilts production line dust mesh mesh part of the plug can not produce coagulation effect.
2. Quilts production line anti-stickers hanging flowers.
3. The quilts production line tightening the roller between the hard debris stuck or oil.
4. cotton quilts production line inside and outside the head of hanging flowers.
5. Quilts production line dust cage fan wind shortage.
(C) lap wrinkles
The main reason for this is:
1. The quilts production line tightening the roller part of the gear is wrong.
2. The quilts production line lap rolls to the pressed rolls are too small.
3. Cotton quilts production line cotton roll hook pressure is too large.
4. The relative temperature of the workshop is too high.
(D) the lap contains too much silk
Lycra in the lacquer known as Luosai Si, is due to the repeated twist after the formation of cotton and tight cotton, the book li cotton carding and yarn is very unfavorable, the general lap should not contain cable, silk, lap The main reason why the cable is too much,
1. Too many points, or thugs too high, the original cotton by excessive blows.
2. Fu Fu and peeling knife gap is too large, too much to return flowers, raw cotton by repeated blows.
3. thugs and dust bar gauge is too small, the original cotton in the thugs and dust between the rub by the squeeze.
4. Then use cotton, back to spend too much use.
5. thugs, after the chaos is not clear the formation of the cotton cord removed.